2 " Vertical Blevin's Stirrup Buckles Replacement Sleeves
These are leather covered Blevins slides made for the Blevins quick change stirrup buckles. These are the 2" leather covered sleeves for the vertical hole pattern. If your not sure which ones you need , measure your stirrup leathers for width and look at the holes. If your leathers are 2" wide and have holes in a vertical line ( on top of each other) then these are the right buckles. You can also see the pictures to help with ordering. Make sure you are going by the width of the stirrup leather and not the width of the sleeve. If your are going by the width of the sleeve, make sure it is the inside of the sleeve and not the outside measurement. A 2" stirrup leather fits inside the sleeve. I don't use this size much but had had some factory built saddles in for repair so they have been added to the store as they must be getting more common.
These are priced per each so if you need slides for both sides of your saddle, you need to order 2 in the Qty box when you order. If these are not the right style or size for you saddle see the other listings for the correct version. I have included a picture of the metal part that has the posts and also a picture of a 2', 2 1/2", and 3" Vertical replacement slide. This item is for one Blevins Buckles 2" vertical post replacement sleeve. The other items are for reference only. The part with the posts on these 2" Blevins are the same size as on the 2 1/2" so be aware of that. The difference between the 2 is the width inside the sleeve. for these to fit, your stirrup leather needs to be 2" wide and not wider than that . If it is 2 1/2, then you have the 2 1/2" Blevins on your saddle.